NadTec / Projects

Reference Projects

Explore previous and ongoing assignments. Filter by systems and technologies or search for a specific project.

Find projects

5× SGT 800 PG: Iraq

2026 –>

PCS7 v10.0 • PLC Programming, WinCC, Grid Code Compliance, Cyber Security, Siemens Process Historian

PCS7 WinCC Gas Turbine PG Safety/SIL Modbus Energy Sector Siemens Energy AB

Ongoing project.

Automation Engineering Consultant: Bengt Dahlgren, Norrköping

2026 –>

Technical Consulting • System Architecture • Engineering Documentation • Industrial Automation

Technical Consulting Documentation Industrial Automation System Architecture

Ongoing project.

SGT 800 PG: Bahamas

2025–2026

System: Omnivise T3000 • PLC Programming, Simulation and Project-Specific Engineering

T3000 Gas Turbine PG Simulation Energy Sector Siemens Energy AB

Development and customization within the Omnivise T3000 environment.
Simulation and validation of control logic and customer-specific requirements.

Steam Turbine Development: Sweden

2024–2025

System: PCS7 v9.1 • Code Harmonization, Industrial Communications and Documentation

PCS7 Steam Turbine Simulation Development Modbus Energy Sector Siemens Energy AB

Development and harmonization of standard software within the PCS7 platform.
Focused on robust communication, engineering documentation and software reusability.

Steam and Radial Turbine for the Pulp & Paper Industry: Sweden

2024–2025

PCS7 v9.1 • Relay-Based Control System Migration, Factory Acceptance Testing and Verification

PCS7 Radial Turbine Migration Simulation FAT/SAT Modbus Energy Sector Siemens Energy AB

Modernization of a legacy relay-based control system to a PCS7 solution.
Factory Acceptance Testing (FAT), functional verification and quality assurance of software and engineering documentation.

10× SGT 700 Mechanical Drive: Qatar

2023–2025

PCS7 v9.1 • Centralized SPHA I/O, Project-Specific Engineering and Factory Acceptance Testing

PCS7 Gas Turbine MD Simulation Project Management Industrial Networking FAT/SAT Energy Sector Modbus Siemens Energy AB

PLC programming and project-specific engineering.
Development and testing of centralized I/O architecture in a factory test environment.

2× SGT 750 PG: Romania

2022–2025

PCS7 v9.0 • Site Support, Troubleshooting, Grid Code Compliance and Siemens Process Historian

PCS7 Gas Turbine PG Safety/SIL Commissioning Modbus Energy Sector Siemens Energy AB

On-site support including troubleshooting, software modifications and engineering documentation.
Grid Code implementation and configuration of Siemens Process Historian.

2× SGT 700 Mechanical Drive: Peru

2023–2025

PCS7 v8, WinCC • Migration, System Upgrades and Site Support

PCS7 SCADA Migration Gas Turbine MD Energy Sector Siemens Energy AB

Migration and upgrade of PCS7 and WinCC systems.
Software modifications and on-site technical support.

SCADA and Server Upgrade: Katrineholm, Sweden

2022–2023

Windows Server 2019, Cactus Eye SCADA, OPC UA • Project Management, Procurement and Cybersecurity

Cactus Eye SCADA OPC UA Project Management Industrial Networking Tekniska Verken

Project management and coordination of a SCADA and server infrastructure upgrade.
Procurement, cybersecurity, operational support and troubleshooting.

Automation Engineering Support: Tekniska Verken

2021–2024

Schneider EcoStruxure Control Expert, STEP 7 Classic, TIA Portal • Ongoing Troubleshooting and System Modifications

TIA Portal STEP 7 Classic Schneider Pluto OPC Commissioning Tekniska Verken

Engineering support and system modifications in mixed PLC and SCADA environments.

Sweden Timber: Ongoing Assignments

2020–2025

Mitsubishi GX Works 2/3 and GX Developer • System Modifications, Troubleshooting and Modernization

GX Developer GX Works 2 & 3 GT Works 3 Mitsubishi STEP 7 Classic TIA Portal Commissioning Migration Development Pluto Modbus RTU HMI Sweden Timber Sawmill Industry

Software modifications and continuous improvements in Mitsubishi and Siemens automation environments.

Johnson Controls: Sweden

2020–2024

TIA Portal, WinCC • Software Modifications and System Modernization

WinCC TIA Portal GX Works FAT Johnson Controls

Software modifications and improvements to PLC and HMI solutions.

Extended Scope / Balance of Plant: Brazil

2020–2023

Subproject Management • Coordination between Electrical, Automation, Customer and Subcontractors

PCS7 Project Management Gas Turbine PG Safety/SIL Industrial Networking Energy Sector Siemens Energy AB

Subproject management and technical coordination across multiple engineering disciplines.
Close collaboration with customers and subcontractors throughout the project lifecycle.

Sawmill Production Line Programming: Hjortkvarn, Sweden

2022

GX Works, GT Works and Pluto • PLC Programming for a New Sawmill Production Line

Development FAT/SAT Industrial Networking Simulation Modbus Commissioning

Development, PLC programming and commissioning of a new sawmill production line.
Verification of safety functions, operational performance and system optimization.

Preem Fuel Depot: Sweden

2021–2022

GX Works 2, TIA Portal and SCADA • System Modernization and Software Modifications

TIA Portal GX Works Migration Modbus RTU Preem

Modernization and software modifications in mixed PLC environments.

SSAB: Sweden

2020–2022

STEP 7 Classic • System Modifications and Plant Support

STEP 7 Classic WinCC

Engineering support and system modifications in STEP 7 Classic environments.

Screw Press Control System: Finspångs Tekniska

2021

GX Works • iFIX SCADA

iFIX SCADA PLC Programming Commissioning

PLC programming and commissioning of a pumping station.

Pumping Station PLC Programming and Commissioning: Finspångs Tekniska

2020

GX Works • iFIX SCADA

iFIX SCADA Radio Link PLC Programming Commissioning

PLC programming and commissioning of a pumping station.

Toyota Material Handling: Automated Fork Manufacturing

2019–2020

TIA Portal • Subproject Management, PLC Programming, Commissioning and Engineering Documentation

TIA Portal Project Management Development Simulation Commissioning Industrial Networking Material Handling Toyota Material Handling

Subproject management, software development, procurement of electrical cabinets, hardware testing, commissioning and engineering documentation.

Swisslog / PTC: Commissioning Projects Across Europe

2017–2019

Beckhoff, TwinCAT 3, TIA Portal, STEP 7 Classic • Development, Simulation, Optimization and Commissioning

Beckhoff TwinCAT TIA Portal STEP 7 Classic Simulation FAT/SAT Commissioning Automated Warehouse Solutions Swisslog

Commissioning of automated warehouse systems for customers including Nespresso (Switzerland), Kesko (Finland) and Malorama (Norway).

Swisslog / PTC: Conveyor System Development

2017–2019

Beckhoff, TwinCAT 3, TIA Portal, STEP 7 Classic • Development, Simulation and Optimization

Beckhoff TwinCAT TIA Portal STEP 7 Classic Simulation FAT/SAT Development Automated Warehouse Solutions Swisslog

Development and optimization of automated warehouse solutions, including simulation and hardware testing.

Torpheimergruppen: Building Automation

2016–2017

Automate, Beijer iX, Citect • PLC Programming, Industrial Networking, HMI and Commissioning

SCADA Industrial Networking Torpheimergruppen Building Automation

PLC programming and commissioning of building automation systems.

SGT 800 PG: E.ON, Germany

2015–2016

SPPA-T3000 • Industrial Communications, Factory Acceptance Testing and Commissioning

T3000 Industrial Communications FAT/SAT Simulation Commissioning Energy Sector Siemens Energy AB

Implementation of communication-related modifications in SPPA-T3000.
Participation in Factory Acceptance Testing (FAT) and on-site commissioning activities.

3× SGT 750 Mechanical Drive: Mexico

2014–2016

PCS7 v7 • Subproject Management, PLC Programming and Engineering Documentation

PCS7 Project Management Gas Turbine MD Simulation Energy Sector Siemens Energy AB

Subproject management and coordination throughout the project delivery.
PLC programming and engineering documentation within the PCS7 environment.

Omnivise T3000 Development and Delivery Coordinator

2014–2016

Omnivise T3000 • Project Management

T3000 Development Project Management Energy Sector Siemens Energy AB

Project management and software development within the Omnivise T3000 platform.
Technical coordination between engineering teams in Sweden, Germany and the United States.

SGT 700/800 Standard Software Development: Sweden

2014

SPPA-T3000 • Development of New Standard Software (R&D)

T3000 Development Simulation Energy Sector Siemens Energy AB

Development of new standard software for research and development.
Focused on software architecture, reusability and quality assurance.

2× SGT 700 PG, Belarus

2013–2014

PCS7 v7 • Programming, commissioning, IT support

PCS7 Gas turbines PG Communications Network/Server Energy sector Siemens Energy AB

Programming and commissioning in a PCS7 environment.
IT and network related support during delivery.

SGT 700 PG, Germany

2013-2014

System: Omnivise T3000 • Programming, simulation, commissioning and project adaptations

T3000 Gas turbine PG Simulation Commissioning Energy sector Siemens Energy AB

Development and adaptation in the Omnivise T3000 environment.
Simulation and validation of control logic, followed by commissioning.

Factory acceptance testing, Finland

2012

SPPA T3000 • Testing an SGT 700 and its network in a simulated DCS environment

T3000 FAT/SAT Network/Server Simulation Energy sector Siemens Energy AB

Factory acceptance testing in a simulated environment for the SGT 700.
Verification of networking functions and communications.

SGT 600 PG, Russia

2011–2012

PCS7 v6 • Programming and factory acceptance testing

PCS7 Gas turbine PG Simulation FAT/SAT Energy sector Siemens Energy AB

Programming in PCS7 v6.
Simulation and factory acceptance tests.